|
ForumsSega Master System / Mark III / Game GearSG-1000 / SC-3000 / SF-7000 / OMV |
Home - Forums - Games - Scans - Maps - Cheats - Credits Music - Videos - Development - Hacks - Translations - Homebrew |
Author | Message |
---|---|
|
Help! How to put the eprom Golden ax warrior on the Monopoly board?
Posted: Thu Mar 20, 2014 9:32 pm
|
Hello everyone I need some help .... sorry I'm using google translator
Recently bought a cartridge MONOPOLY and would replace it with a eprom GOLDEN AXE WARRIOR ... However Monopoly uses only 28-pin EPROM and I used the Golden ax warrior is 32 pin 27C2001 ... I've seen who did work ... however I do not know ... Would you like some help, does anyone have the schematic for me to pass? Step by step how do I work my Golden ax warrior on the Monopoly board? |
|
|
Posted: Thu Mar 20, 2014 11:24 pm |
Are you asking about Master System or something else?
Have you read this: http://cgfm2.emuviews.com/smsflash.php |
|
|
Posted: Thu Mar 20, 2014 11:37 pm |
yes I've seen this ... if he uses a card that is already 32 pins a game that uses 4mb ...
In my case I'm trying to use the board's monopoly by having the battery save. So the Monopoly if I'm not mistaken is 1MB and and the chip uses 28 pins. Then I wanted to know if anyone knows how to put a 32 pin eprom 27C2001 in the Monopoly board with 28 pins ... I've seen someone doing it has a picture up here in the forum, but no one even taught how to do it step by step. If anyone knows and can explain to me I would appreciate it because I want to throw the golden ax warrior with rom translated into my language. |
|
|
Posted: Thu Mar 20, 2014 11:50 pm |
I don't know what it looks like inside, so can you get a photo for me of the monopoly board? | |