Forums

I just got a Sega SG-1000 II I purchased from a seller in japan... The console seems to be in fairly good condition. However, I am yet to get a couple of carts to fully test it.

The console case is in good shape but missing the yellow pause button. So I am wondering about 3D printing it, however, I do not own another console like this. So, wondering about if anyone with one of these consoles would mind to share the dimensions of this piece so I can design and 3D print it. BTW, the internal peg is still there.

As I got no actual responses.. I went ahead and asked a friend to design the piece based on the dimensions of the hole where the button goes. Will share an update and images once I get the printed piece and test it out.

xbgh6z5f07m71[2].jpg (373.89 KB)

SG-1000 II Console

gx6s8r3i07m71[1].jpg (420.15 KB)

Console Close Up

Author	Message
SmakyTaky Joined: 09 Sep 2021 Posts: 1 Location: Mexico City	Sega SG-1000II Missing Pause Button Posted: Thu Sep 09, 2021 2:24 pm
	I just got a Sega SG-1000 II I purchased from a seller in japan... The console seems to be in fairly good condition. However, I am yet to get a couple of carts to fully test it. The console case is in good shape but missing the yellow pause button. So I am wondering about 3D printing it, however, I do not own another console like this. So, wondering about if anyone with one of these consoles would mind to share the dimensions of this piece so I can design and 3D print it. BTW, the internal peg is still there. As I got no actual responses.. I went ahead and asked a friend to design the piece based on the dimensions of the hole where the button goes. Will share an update and images once I get the printed piece and test it out. xbgh6z5f07m71[2].jpg (373.89 KB) SG-1000 II Console gx6s8r3i07m71[1].jpg (420.15 KB) Console Close Up

Forums

View topic - Sega SG-1000II Missing Pause Button