|
ForumsSega Master System / Mark III / Game GearSG-1000 / SC-3000 / SF-7000 / OMV |
Home - Forums - Games - Scans - Maps - Cheats - Credits Music - Videos - Development - Hacks - Translations - Homebrew |
Author | Message |
---|---|
|
512k HM628512 cartridge problem
Posted: Mon Nov 23, 2020 1:29 pm
|
Hi!, I just build a 512k SRAM cartridge with an Afterburner donor for use with the smsreader.
I used the hitachi HM628512 chip, and followed this steps from mike g: https://www.smspower.org/forums/1823-PhantasyStarCartridge#8835 Lifting pins 1 22 29 (32 is vcc in aferburner so I soldered normally in his hole). Pin 1 went to a14 rom in the mapper, pin 22 to CE in the mapper and pin 29 to the write protect switch as the cartrtidge tutorial says. I used the ICL7673 to battery back the sram, BUT with this memory chip, I dont have a second inverted chip enabler pin for standby battery mode, So, first I tried with pin 6 of the 7673 unconnected, no big deal, the sram cant keep the rom after I disconnect the cart from the programmer. Second, soldered the pin 6 of the 7673 to the CE pin in the SRAM (pin 22) and the cart worked. The problem is that I get data corruption and graphic glitches. Any thoughts? Thanks in advance for your help. |
|