- Joined: 25 Nov 2015
- Posts: 143
|
Problems using Sega Mark III
Posted: Fri Nov 22, 2019 9:43 am
|
Hi guys,
I recently bought a used Mark III with baseball game; when I turn on the console the game seems to be fine but after pressing any button at the team selection screen I got what seems to be like a console "freeze".
Demo mode (leaving title screen for few seconds) works fine.
I also tested a F16 Fighting Falcon cart game (for Sega Master System) and the game seems to run fine but absolutely no buttons seem to work.
I do not have any other game to test (just bought a SMS adapter to use master system games - I would like to test GG everdrive too on it).
I am using an original master system gamepad (I do not have a mark III game pad).
Any hint about what the problem can be ? Faulty console ? Please help me because I have the chance to give the console back.
|
- Joined: 28 Feb 2016
- Posts: 503
- Location: Barcelona
|
Posted: Fri Nov 22, 2019 10:07 pm
|
Hello
Do you have cleaned cartridge slot????
|
- Joined: 25 Nov 2015
- Posts: 143
|
Posted: Fri Nov 22, 2019 10:12 pm
|
BcnAbel76 wrote Hello
Do you have cleaned cartridge slot????
Tomorrow i will reclean them but it is strange that both the cartridge and card slot are dirty... don't You Think?
|
- Joined: 28 Feb 2016
- Posts: 503
- Location: Barcelona
|
Posted: Fri Nov 22, 2019 10:37 pm
|
If console does not power on by years some oxid can be added to slots.
It is only a hypothesis
|
- Joined: 25 Nov 2015
- Posts: 143
|
Posted: Sat Nov 23, 2019 3:05 pm
|
BcnAbel76 wrote If console does not power on by years some oxid can be added to slots.
It is only a hypothesis
Cleaned with specific circuit prducto: always the same freeze :(
EDIT
Problem solved: Mark III has inverted P1 and P2 joypad prots (compared to the Master System), I was trying to use P2 port as P1... sad story :(
|