- Joined: 29 Jan 2018
- Posts: 23
- Location: UK
|
YENO SC-3000H no green on RGB
Posted: Wed Aug 31, 2022 10:45 am Last edited by RetroByte on Wed Aug 31, 2022 3:11 pm; edited 1 time in total
|
Hi again,
My SC-3000H seems to have no green in the picture.
I only have Championship Soccer to test it with and it looks like green is missing, I assume the pitch should be green?
I'm using a Sega SCART cable that uses 220uf capacitors and 75ohm resistors. I've checked the cable, even swapping the capacitors between the red and green.
The only information I can find about cables is for the Master System and Mega Drive, would this SC-3000H be different?
|
- Joined: 29 Jan 2018
- Posts: 23
- Location: UK
|
Posted: Wed Aug 31, 2022 3:09 pm
|
Some news:
I've found that green should be on pin7, so it's different to the SMS.
The cable I have has a moulded 8 pin DIN and although 9 wires are in the SCART plug, pin 7 wasn't one of them. So, I've ordered a plug.
|
- Joined: 05 Nov 2014
- Posts: 435
- Location: Auckland - NZ
|
Posted: Thu Sep 01, 2022 8:35 am
|
Watch out which plug you get as there are two variants, they look similar but are not compatible witj each other. One has the pins in a circular pattern and the other has the pins in a horse shoe shaped pattern. The master system uses the horse shoe type, so if the cable you already have is a master system one but still fits the yeno sc3000 then that will be the type you want.
|
- Joined: 29 Jan 2018
- Posts: 23
- Location: UK
|
Posted: Thu Sep 01, 2022 8:52 am
|
Thanks for the info, I did know there are at least 2 types, I believe the pin thickness might be different as well.
I've ordered a cheap one which looks like the correct one, but they didn't show much information, so fingers crossed :)
|