Forums

Hi everyone,

I've been slowly but surely recovering data from a mile-high stack of floppy disks using a Greaseweazle over the past few months, and after a few attempts I finally managed to recover all of the source code and assets for an unreleased game from my time as a developer at Spidersoft - namely, Poker Face Paul's Cribbage.

Adrenalin Entertainment - formerly a divison of Western Technologies, a company run by Jay Smith of Smith Engineering (the company that invented the Vectrex) - commisioned a series of these card games. I wrote the help system used in these games, but the principal developer was Dave de Pauw. Fun fact: Dave and I were two of the co-founders of LSD, an Amiga demoscene group.

The code was edited in the DOS-based Boxer editor and assmbled using Krisalis Software's KASM assembler/debugger. Devkit hardware was the ESYS ROM emulator, made by Spidersoft.

Unfortuantely the DOS tools used to gcreate assets for the game were not on this floppy, but I may have them on another floppy somewhere. Spidersoft wrote a mostly standard set of tools unless a game required
a developer to write something unique (e.g. Lemmings 2 map tools).

As this code is built for Gameboy as well as SMS and GG, it should be very straightforward to built the GB ROM. The GB version was also unreleased.

Getting this built and running shouldn't be too much trouble. I'll do my best to answer any questions about the code and assets, but bear in mind this is from nearly 30 years ago, so many of those neurons may not fire anymore ;)

Poker Face Paul Cribbage - Source.zip (819.65 KB)

This sounds interesting, can I crosspost this on Sega Retro?

edit: done'd.

Thank you very much for sharing.

Thank you for the wonderful gift Matt !
Let's hope someone gets this to build soon :)

*EDIT* Matt posted a copy of KASM 1.77 here: https://www.smspower.org/forums/15019-KrisalisSoftwareSMSGGDevBox#108225

Matt do you remember the commands/settings to skip running debugger in KASM and get a binary?

With DOSBOX by Mounting ("MOUNT C C:\Cribbage") so that all files (sources and KASM) appears C:\KASM i can run kasmz8e.exe
It seems to be doing some assembling but no output file to be found. The debugger does runs but data in there seems empty.

My output is:

Krisalis z80 (esys) M-S/G-G Assembler/Debugger V1.01
Copyright 1992 Krisalis Software Ltd /HKH Services. <0709 372290>

454864 bytes available for the symbol table.

Pass one.
Pass two.

Sent MS/GG bootup code.Reset target.[Esc,R]
Sent MS/GG bootup code.Reset target.[Esc,R]
Sent MS/GG bootup code.Reset target.[Esc,R]MATBUF = 4736

CHRBUF MAX = 5160

RAM END = #DC0E

END OF LOW PROG = #FB0

NON SWITCHING = #3726

PROG END = #7F9E

--------- DATA ROM ---------

NON-WRAPING DATA = #37B3

>> Banks 2 TO 7 = #1510

BANKS USED = #15510

BANKS LEFT = #2AF0

------------------

Press a key to continue ...

*** End of assembly ***

22948 lines assembled.
1399 global symbols
362 local symbols
0 error(s)
2046 Bytes of MACRO/FUNCTION ram used out of 16384
32416 Bytes of symbol table used out of 454864
Took 50 Seconds
Sorting symbols for debug....

As for KASMBOY:

Krisalis 'Ni****do GameBoy' (TM) Assembler/Debugger V1.10
Copyright 1992 Krisalis Software Ltd /HKH Services. <0709 372290>

461072 bytes available for the symbol table.

Pass one.
INCLUDE\CHLOWROM.Z80(99) Bad instruction.
INCLUDE\CHLOWROM.Z80(117) Bad instruction.
INCLUDE\CHLOWROM.Z80(119) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1576) Illegal memory reference.
INCLUDE\CHSYSTEM.Z80(1585) Bad/Illegal Register.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1589) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1593) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1655) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1661) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1664) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1665) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1671) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1713) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1719) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1723) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1727) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1737) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1742) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1748) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1755) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1757) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1813) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1819) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1829) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1832) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1856) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1864) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1867) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1932) Bad/Illegal Register.
INCLUDE\CHSYSTEM.Z80(1933) Bad/Illegal Register.
INCLUDE\CHSYSTEM.Z80(1934) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1946) Illegal memory reference.
INCLUDE\CHSYSTEM.Z80(1962) Bad instruction.
INCLUDE\CHSYSTEM.Z80(1963) Too many errors! [FATAL]
TEXT: OUT (VDPA),A

Not much time to pursue this tonight.

debugger.png (32.84 KB)

I had a play with this today and I don't think it's possible to extract the binary without either the real hardware or hacking KASM.

It seems to assemble in memory then try to upload the program to the debug hardware during Pass two.

Interestingly it seems to send binary data to the soundcard, whether this contains the ROM or simply commands for the debugger I'm unsure.

You can the command nolink to the PROJECT.Z8E which tells it to skip the debug/monitor but it only verifies the code for errors and won't output a file.

There's a command in the monitor console specifically for downloading the ROM from the debug hardware to a file, but again without the hardware, there's nothing to download.

U upload download
   angle bracket:
   Uploads/downloads memory to file,file to memory
   U>filename,32768,4096
   uploads ram from 32768 len 4096 and puts it in file filename

   U<filename,1024
   downloads filename to address 1024 for however long it is.
   be sure not to overwrite any download software you may have.
   No file length is checked so be sure the file is not too big!

   braces:

   U}filename,address{big expression},len {big expression}
   upload absolute memory addresses for making rom images
   to make a 256k rom image you can do.
   Big expression is the assemblers 32 bit evaluater and can be
   up to 1mbyte large {1024K}


   U}Game.rom,0,256*1024
   Note that the bank parameters must be set properly to use
   this command. See the assembler directive BANKSPEC for details
   Krisalis Sega boards will work by default.

   U{filename,0
   download rom image filename to target for test.
   Again the BANKSPEC must be set in an assembly

   U{game.rom,0 {enter}
   J startaddress
   Download and run the rom image.
   Be carefull that the download software is not overwritten in
   the download. Move it to ram if need be!

A 1992 assembler may simply hold a full copy of the assembled output (128 KB) before sending to audio out, in which case maybe if we dump the VM RAM at the right time we can find the assembled output inside ?

Possibly, no idea how to do that. The audio during Pass 2 is way too short to contain any ROM data.

There is a much longer binary played after exiting the assembler along with info on the ROM size (attached) which may possibly contain valid ROM data.

data.wav (475.99 KB)

KASM.JPG (52.2 KB)

Bock wrote

A 1992 assembler may simply hold a full copy of the assembled output (128 KB) before sending to audio out, in which case maybe if we dump the VM RAM at the right time we can find the assembled output inside ?

is there some DOS era TSR that could be fired up right before transfer and used to search the RAM until we find something that resembles Z80 code?

Not sure why anything is being sent to audio. ESYS communication is via parallel port, so perhaps DOSBox has some audio hardware hooked up to that port.

I have installed DOSBox-X and redirected the parallel port to file capture. In those captures I can see the KASM boot code and a bit later something that is around the right size to be a ROM, and the Spidersoft copyright message is at the start - so looks about right. But won't load in an emulator, so something is clearly off. I've attached the file here.

There are a few other sends to the parallel port which are probably ESYS config. I'll have a peek at those and see if anything stands out.

kasmz8e_010.zip (73.68 KB)

Well, that didn't take long. Looked at the binary more closely and spotted one rogue byte at the start.

Working GG ROM attached :)

cribbage.zip (73.67 KB)

ah, you are probably correct now I think of it because DOSBOX emulates Covox Speech Thing and similar audio DACs on the parallel port. I'll try DOSOX-X.

MattTaylor wrote

Well, that didn't take long. Looked at the binary more closely and spotted one rogue byte at the start.

Working GG ROM attached :)

Ooh brilliant. Thank you! (now to learn the game's rules... X_X)

Nice work on ROM!

For anyone trying to compile the Gameboy version, you need to edit CRIBBAGE.Z80 and change the first line to say GBOY EQU 1.

Attached is the assembled ROM but it seems to be missing part of the header so won't boot.

cribbage-gb.zip (53.14 KB)

MattTaylor wrote

Fun fact: Dave and I were two of the co-founders of LSD, an Amiga demoscene group.

To this day I still enjoy the occasional play of Jesus on E's. Best Amiga demo!

Did you work on Battle Engine Aquila? I tested it, would love a modern remake of that.

It took me a few hands to figure out how to play this game (I never heard about Cribbage), but here's some gameplay: https://www.youtube.com/watch?v=ubnog7iikho

I also have a question: there seems to be 4 more "Poker Face Paul" card games on our wiki (Blackjack, Gin, Poker, Solitaire), shouldn't they be collected as a series (e.g. like Sonic)?

Thanks for posting this, it's interesting to look through. Out of curiosity, how did you use the same codebase on both the game gear and game boy? The game boy's CPU is missing some of the registers from a regular Z80 and I don't see anything in the code to to work around this.

thatawesomeguy wrote

Nice work on ROM!

For anyone trying to compile the Gameboy version, you need to edit CRIBBAGE.Z80 and change the first line to say GBOY EQU 1.

Attached is the assembled ROM but it seems to be missing part of the header so won't boot.

"u{game.rom,0,256" without anything attached to the parallel port gives the first bank (16 kilobytes) of ROM. (Trying to get a larger file just repeats the first 16K.) I combined the first bank with the parallel port output and padded the ROM to 128 kilobytes to get a complete ROM, although a bunch of things are broken.

The contents of MSX/SOLIBOY.BIN needs to be added at $1C000 (beginning of Bank 7), otherwise the game crashes at startup.

The graphics are messed up, though. I was able to add BAZEFONT.CGB (after SOLIBOY) to restore one of the fonts, but all the other graphics are still broken. I suspect that a lot of the graphics data is in the wrong position (and that the banks need to be moved around).

ROM.zip (57.63 KB)

ROM (in-game with broken graphics)

I tried the ROM on both Emulicious and SameBoy and neither would boot.

I also had the distinct impression that much of the data was in the wrong places, and there are large segments of plaintext that don't match the GG version so I suspect there's some non-ROM data mixed in there too.

Matt, thank you very, very much. I love the music, too.

Thank Matt.

On my first playthrough I noticed glitches on the right side of the result screen, which prompted me to do the parallel port logging on DosBox-X to look at the data. My output had 606 extra bytes accounted for.

However none of that data got accessed in my test with MEKA:

break r rom 1d510..

So I'm not sure what to make of it. Did you intently remove those 606 bytes? They are not in your first dump.

I also padded the ROM with FF as not all software/flash card will happily receive a non-power-of-two file.

- Regardless of those extra bytes couldn't repro the visual glitch (see attachment).
- I also got a crash (some infinite loop) at end of a 7-card w/ Auction Game.

Matt, in your memory was the game 100% finished and QA-ed ?

Quote

I also have a question: there seems to be 4 more "Poker Face Paul" card games on our wiki (Blackjack, Gin, Poker, Solitaire), shouldn't they be collected as a series (e.g. like Sonic)?

Good idea, done![/quote]

Poker Face Paul's Cribbage [Proto]-28.png (2.88 KB)

cribagge_alt_padded.zip (73.73 KB)

Great work - hopefully a downloadable sms rom will be on the cards soon! (No pun intended!)

Bock wrote

Thank Matt.
So I'm not sure what to make of it. Did you intently remove those 606 bytes? They are not in your first dump.

I didn't remove anything, but it's possible KASM sent data that were unrelated to the ROM itself when you ran it.

Bock wrote

Matt, in your memory was the game 100% finished and QA-ed ?

It's an unreleased game, so certainly not fully QAed (e.g. externally by a publisher) - but from what I remember it was finished.

I'm confused, which one is the good ROM (with working graphics and such)? And how much padding is there in the alt? ~Red

Edit: Never mind, I figured out the second question. Here's the unpadded version for the sake of convenience. ~Red

Edit 2: We am dumb and forgot to clarify that we only figured out the second question. ~Cherri

cribbage_alt_unpadded.zip (73.34 KB)

Author	Message
MattTaylor Joined: 13 Apr 2014 Posts: 25 Location: London, UK	Poker Face Paul's Cribbage (Unreleased Game) - Source & Data Posted: Tue Jan 04, 2022 4:07 pm
	Hi everyone, I've been slowly but surely recovering data from a mile-high stack of floppy disks using a Greaseweazle over the past few months, and after a few attempts I finally managed to recover all of the source code and assets for an unreleased game from my time as a developer at Spidersoft - namely, Poker Face Paul's Cribbage. Adrenalin Entertainment - formerly a divison of Western Technologies, a company run by Jay Smith of Smith Engineering (the company that invented the Vectrex) - commisioned a series of these card games. I wrote the help system used in these games, but the principal developer was Dave de Pauw. Fun fact: Dave and I were two of the co-founders of LSD, an Amiga demoscene group. The code was edited in the DOS-based Boxer editor and assmbled using Krisalis Software's KASM assembler/debugger. Devkit hardware was the ESYS ROM emulator, made by Spidersoft. Unfortuantely the DOS tools used to gcreate assets for the game were not on this floppy, but I may have them on another floppy somewhere. Spidersoft wrote a mostly standard set of tools unless a game required a developer to write something unique (e.g. Lemmings 2 map tools). As this code is built for Gameboy as well as SMS and GG, it should be very straightforward to built the GB ROM. The GB version was also unreleased. Getting this built and running shouldn't be too much trouble. I'll do my best to answer any questions about the code and assets, but bear in mind this is from nearly 30 years ago, so many of those neurons may not fire anymore ;) Poker Face Paul Cribbage - Source.zip (819.65 KB)

Tom Joined: 16 May 2002 Posts: 1356 Location: italy	Posted: Tue Jan 04, 2022 4:08 pm
Tom Joined: 16 May 2002 Posts: 1356 Location: italy	This sounds interesting, can I crosspost this on Sega Retro? edit: done'd.

KingMike Joined: 14 Oct 2008 Posts: 510	Posted: Tue Jan 04, 2022 8:42 pm
KingMike Joined: 14 Oct 2008 Posts: 510	Thank you very much for sharing.

Bock Site Admin Joined: 08 Jul 2001 Posts: 8649 Location: Paris, France	Posted: Tue Jan 04, 2022 9:24 pm
	Thank you for the wonderful gift Matt ! Let's hope someone gets this to build soon :) EDIT Matt posted a copy of KASM 1.77 here: https://www.smspower.org/forums/15019-KrisalisSoftwareSMSGGDevBox#108225

Bock Site Admin Joined: 08 Jul 2001 Posts: 8649 Location: Paris, France	Posted: Tue Jan 04, 2022 9:58 pm
	Matt do you remember the commands/settings to skip running debugger in KASM and get a binary? With DOSBOX by Mounting ("MOUNT C C:\Cribbage") so that all files (sources and KASM) appears C:\KASM i can run kasmz8e.exe It seems to be doing some assembling but no output file to be found. The debugger does runs but data in there seems empty. My output is: Krisalis z80 (esys) M-S/G-G Assembler/Debugger V1.01 Copyright 1992 Krisalis Software Ltd /HKH Services. <0709 372290> 454864 bytes available for the symbol table. Pass one. Pass two. Sent MS/GG bootup code.Reset target.[Esc,R] Sent MS/GG bootup code.Reset target.[Esc,R] Sent MS/GG bootup code.Reset target.[Esc,R]MATBUF = 4736 CHRBUF MAX = 5160 RAM END = #DC0E END OF LOW PROG = #FB0 NON SWITCHING = #3726 PROG END = #7F9E --------- DATA ROM --------- NON-WRAPING DATA = #37B3 >> Banks 2 TO 7 = #1510 BANKS USED = #15510 BANKS LEFT = #2AF0 ------------------ Press a key to continue ... * End of assembly * 22948 lines assembled. 1399 global symbols 362 local symbols 0 error(s) 2046 Bytes of MACRO/FUNCTION ram used out of 16384 32416 Bytes of symbol table used out of 454864 Took 50 Seconds Sorting symbols for debug.... As for KASMBOY: Krisalis 'Ni****do GameBoy' (TM) Assembler/Debugger V1.10 Copyright 1992 Krisalis Software Ltd /HKH Services. <0709 372290> 461072 bytes available for the symbol table. Pass one. INCLUDE\CHLOWROM.Z80(99) Bad instruction. INCLUDE\CHLOWROM.Z80(117) Bad instruction. INCLUDE\CHLOWROM.Z80(119) Bad instruction. INCLUDE\CHSYSTEM.Z80(1576) Illegal memory reference. INCLUDE\CHSYSTEM.Z80(1585) Bad/Illegal Register. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1589) Bad instruction. INCLUDE\CHSYSTEM.Z80(1593) Bad instruction. INCLUDE\CHSYSTEM.Z80(1655) Bad instruction. INCLUDE\CHSYSTEM.Z80(1661) Bad instruction. INCLUDE\CHSYSTEM.Z80(1664) Bad instruction. INCLUDE\CHSYSTEM.Z80(1665) Bad instruction. INCLUDE\CHSYSTEM.Z80(1671) Bad instruction. INCLUDE\CHSYSTEM.Z80(1713) Bad instruction. INCLUDE\CHSYSTEM.Z80(1719) Bad instruction. INCLUDE\CHSYSTEM.Z80(1723) Bad instruction. INCLUDE\CHSYSTEM.Z80(1727) Bad instruction. INCLUDE\CHSYSTEM.Z80(1737) Bad instruction. INCLUDE\CHSYSTEM.Z80(1742) Bad instruction. INCLUDE\CHSYSTEM.Z80(1748) Bad instruction. INCLUDE\CHSYSTEM.Z80(1755) Bad instruction. INCLUDE\CHSYSTEM.Z80(1757) Bad instruction. INCLUDE\CHSYSTEM.Z80(1813) Bad instruction. INCLUDE\CHSYSTEM.Z80(1819) Bad instruction. INCLUDE\CHSYSTEM.Z80(1829) Bad instruction. INCLUDE\CHSYSTEM.Z80(1832) Bad instruction. INCLUDE\CHSYSTEM.Z80(1856) Bad instruction. INCLUDE\CHSYSTEM.Z80(1864) Bad instruction. INCLUDE\CHSYSTEM.Z80(1867) Bad instruction. INCLUDE\CHSYSTEM.Z80(1932) Bad/Illegal Register. INCLUDE\CHSYSTEM.Z80(1933) Bad/Illegal Register. INCLUDE\CHSYSTEM.Z80(1934) Bad instruction. INCLUDE\CHSYSTEM.Z80(1946) Illegal memory reference. INCLUDE\CHSYSTEM.Z80(1962) Bad instruction. INCLUDE\CHSYSTEM.Z80(1963) Too many errors! [FATAL] TEXT: OUT (VDPA),A Not much time to pursue this tonight. debugger.png (32.84 KB)

thatawesomeguy Joined: 25 Jul 2007 Posts: 729 Location: Melbourne, Australia	Posted: Wed Jan 05, 2022 7:18 am
	I had a play with this today and I don't think it's possible to extract the binary without either the real hardware or hacking KASM. It seems to assemble in memory then try to upload the program to the debug hardware during Pass two. Interestingly it seems to send binary data to the soundcard, whether this contains the ROM or simply commands for the debugger I'm unsure. You can the command nolink to the PROJECT.Z8E which tells it to skip the debug/monitor but it only verifies the code for errors and won't output a file. There's a command in the monitor console specifically for downloading the ROM from the debug hardware to a file, but again without the hardware, there's nothing to download. U upload download angle bracket: Uploads/downloads memory to file,file to memory U>filename,32768,4096 uploads ram from 32768 len 4096 and puts it in file filename U<filename,1024 downloads filename to address 1024 for however long it is. be sure not to overwrite any download software you may have. No file length is checked so be sure the file is not too big! braces: U}filename,address{big expression},len {big expression} upload absolute memory addresses for making rom images to make a 256k rom image you can do. Big expression is the assemblers 32 bit evaluater and can be up to 1mbyte large {1024K} U}Game.rom,0,256*1024 Note that the bank parameters must be set properly to use this command. See the assembler directive BANKSPEC for details Krisalis Sega boards will work by default. U{filename,0 download rom image filename to target for test. Again the BANKSPEC must be set in an assembly U{game.rom,0 {enter} J startaddress Download and run the rom image. Be carefull that the download software is not overwritten in the download. Move it to ram if need be!

Bock Site Admin Joined: 08 Jul 2001 Posts: 8649 Location: Paris, France	Posted: Wed Jan 05, 2022 7:50 am
	A 1992 assembler may simply hold a full copy of the assembled output (128 KB) before sending to audio out, in which case maybe if we dump the VM RAM at the right time we can find the assembled output inside ?

thatawesomeguy Joined: 25 Jul 2007 Posts: 729 Location: Melbourne, Australia	Posted: Wed Jan 05, 2022 9:11 am
	Possibly, no idea how to do that. The audio during Pass 2 is way too short to contain any ROM data. There is a much longer binary played after exiting the assembler along with info on the ROM size (attached) which may possibly contain valid ROM data. data.wav (475.99 KB) KASM.JPG (52.2 KB)

sverx Joined: 05 Sep 2013 Posts: 3825 Location: Stockholm, Sweden	Posted: Wed Jan 05, 2022 10:28 am
	Bock wrote A 1992 assembler may simply hold a full copy of the assembled output (128 KB) before sending to audio out, in which case maybe if we dump the VM RAM at the right time we can find the assembled output inside ? is there some DOS era TSR that could be fired up right before transfer and used to search the RAM until we find something that resembles Z80 code?

MattTaylor Joined: 13 Apr 2014 Posts: 25 Location: London, UK	Posted: Wed Jan 05, 2022 10:44 am
	Not sure why anything is being sent to audio. ESYS communication is via parallel port, so perhaps DOSBox has some audio hardware hooked up to that port. I have installed DOSBox-X and redirected the parallel port to file capture. In those captures I can see the KASM boot code and a bit later something that is around the right size to be a ROM, and the Spidersoft copyright message is at the start - so looks about right. But won't load in an emulator, so something is clearly off. I've attached the file here. There are a few other sends to the parallel port which are probably ESYS config. I'll have a peek at those and see if anything stands out. kasmz8e_010.zip (73.68 KB)

MattTaylor Joined: 13 Apr 2014 Posts: 25 Location: London, UK	Posted: Wed Jan 05, 2022 10:49 am
	Well, that didn't take long. Looked at the binary more closely and spotted one rogue byte at the start. Working GG ROM attached :) cribbage.zip (73.67 KB)

thatawesomeguy Joined: 25 Jul 2007 Posts: 729 Location: Melbourne, Australia	Posted: Wed Jan 05, 2022 10:51 am
	ah, you are probably correct now I think of it because DOSBOX emulates Covox Speech Thing and similar audio DACs on the parallel port. I'll try DOSOX-X.

S.F Joined: 08 Apr 2005 Posts: 474 Location: Netherlands	Posted: Wed Jan 05, 2022 11:16 am
S.F Joined: 08 Apr 2005 Posts: 474 Location: Netherlands	MattTaylor wrote Well, that didn't take long. Looked at the binary more closely and spotted one rogue byte at the start. Working GG ROM attached :) Ooh brilliant. Thank you! (now to learn the game's rules... X_X)

thatawesomeguy Joined: 25 Jul 2007 Posts: 729 Location: Melbourne, Australia	Posted: Wed Jan 05, 2022 12:19 pm
	Nice work on ROM! For anyone trying to compile the Gameboy version, you need to edit CRIBBAGE.Z80 and change the first line to say GBOY EQU 1. Attached is the assembled ROM but it seems to be missing part of the header so won't boot. cribbage-gb.zip (53.14 KB)

segasonic Joined: 12 Dec 2010 Posts: 77 Location: Sheffield, England	Posted: Wed Jan 05, 2022 6:53 pm
	MattTaylor wrote Fun fact: Dave and I were two of the co-founders of LSD, an Amiga demoscene group. To this day I still enjoy the occasional play of Jesus on E's. Best Amiga demo! Did you work on Battle Engine Aquila? I tested it, would love a modern remake of that.

Tom Joined: 16 May 2002 Posts: 1356 Location: italy	Posted: Wed Jan 05, 2022 10:41 pm
Tom Joined: 16 May 2002 Posts: 1356 Location: italy	It took me a few hands to figure out how to play this game (I never heard about Cribbage), but here's some gameplay: https://www.youtube.com/watch?v=ubnog7iikho I also have a question: there seems to be 4 more "Poker Face Paul" card games on our wiki (Blackjack, Gin, Poker, Solitaire), shouldn't they be collected as a series (e.g. like Sonic)?

ndiddy Joined: 20 Feb 2017 Posts: 8	Posted: Thu Jan 06, 2022 1:09 am
ndiddy Joined: 20 Feb 2017 Posts: 8	Thanks for posting this, it's interesting to look through. Out of curiosity, how did you use the same codebase on both the game gear and game boy? The game boy's CPU is missing some of the registers from a regular Z80 and I don't see anything in the code to to work around this.

Pokxc3xa9mon Joined: 06 Jan 2022 Posts: 1	Posted: Thu Jan 06, 2022 4:09 am
Pokxc3xa9mon Joined: 06 Jan 2022 Posts: 1	thatawesomeguy wrote Nice work on ROM! For anyone trying to compile the Gameboy version, you need to edit CRIBBAGE.Z80 and change the first line to say GBOY EQU 1. Attached is the assembled ROM but it seems to be missing part of the header so won't boot. "u{game.rom,0,256" without anything attached to the parallel port gives the first bank (16 kilobytes) of ROM. (Trying to get a larger file just repeats the first 16K.) I combined the first bank with the parallel port output and padded the ROM to 128 kilobytes to get a complete ROM, although a bunch of things are broken. The contents of MSX/SOLIBOY.BIN needs to be added at $1C000 (beginning of Bank 7), otherwise the game crashes at startup. The graphics are messed up, though. I was able to add BAZEFONT.CGB (after SOLIBOY) to restore one of the fonts, but all the other graphics are still broken. I suspect that a lot of the graphics data is in the wrong position (and that the banks need to be moved around). ROM.zip (57.63 KB) ROM (in-game with broken graphics)

thatawesomeguy Joined: 25 Jul 2007 Posts: 729 Location: Melbourne, Australia	Posted: Thu Jan 06, 2022 11:51 am
	I tried the ROM on both Emulicious and SameBoy and neither would boot. I also had the distinct impression that much of the data was in the wrong places, and there are large segments of plaintext that don't match the GG version so I suspect there's some non-ROM data mixed in there too.

Gordman Joined: 21 Aug 2012 Posts: 363 Location: Berlin, Germany	Posted: Thu Jan 06, 2022 2:42 pm
	Matt, thank you very, very much. I love the music, too.

Bock Site Admin Joined: 08 Jul 2001 Posts: 8649 Location: Paris, France	Posted: Sun Jan 09, 2022 6:21 pm
	Thank Matt. On my first playthrough I noticed glitches on the right side of the result screen, which prompted me to do the parallel port logging on DosBox-X to look at the data. My output had 606 extra bytes accounted for. However none of that data got accessed in my test with MEKA: break r rom 1d510.. So I'm not sure what to make of it. Did you intently remove those 606 bytes? They are not in your first dump. I also padded the ROM with FF as not all software/flash card will happily receive a non-power-of-two file. - Regardless of those extra bytes couldn't repro the visual glitch (see attachment). - I also got a crash (some infinite loop) at end of a 7-card w/ Auction Game. Matt, in your memory was the game 100% finished and QA-ed ? Quote I also have a question: there seems to be 4 more "Poker Face Paul" card games on our wiki (Blackjack, Gin, Poker, Solitaire), shouldn't they be collected as a series (e.g. like Sonic)? Good idea, done![/quote] Poker Face Paul's Cribbage [Proto]-28.png (2.88 KB) cribagge_alt_padded.zip (73.73 KB)

Phil Joined: 16 Mar 2006 Posts: 281	Posted: Sun Jan 09, 2022 10:07 pm
Phil Joined: 16 Mar 2006 Posts: 281	Great work - hopefully a downloadable sms rom will be on the cards soon! (No pun intended!)

MattTaylor Joined: 13 Apr 2014 Posts: 25 Location: London, UK	Posted: Mon Jan 10, 2022 2:55 pm
	Bock wrote Thank Matt. So I'm not sure what to make of it. Did you intently remove those 606 bytes? They are not in your first dump. I didn't remove anything, but it's possible KASM sent data that were unrelated to the ROM itself when you ran it. Bock wrote Matt, in your memory was the game 100% finished and QA-ed ? It's an unreleased game, so certainly not fully QAed (e.g. externally by a publisher) - but from what I remember it was finished.

ArcticCircleSys Joined: 16 Sep 2017 Posts: 9	Posted: Tue Jan 11, 2022 5:58 am
ArcticCircleSys Joined: 16 Sep 2017 Posts: 9	I'm confused, which one is the good ROM (with working graphics and such)? And how much padding is there in the alt? ~Red Edit: Never mind, I figured out the second question. Here's the unpadded version for the sake of convenience. ~Red Edit 2: We am dumb and forgot to clarify that we only figured out the second question. ~Cherri cribbage_alt_unpadded.zip (73.34 KB)

Forums

View topic - Poker Face Paul's Cribbage (Unreleased Game) - Source & Data