- Joined: 21 Aug 2019
- Posts: 3
- Location: Sweden
|
Complete PAL to NTSC mod SMS1
Posted: Wed Aug 21, 2019 1:35 pm
|
Hi! I am googling to find a guide how
to make my 50/60hz modded SMS1 PAL into a ”complete” NTSC-console. I am only using RGB-scart, no composite. I have found some info and would like to summarize and see if you guys can confirm if these following steps are correct.
1. 50/60 Hz mod.
2. Install NTSC-oscillator
3. Lift leg 7 on video encoder and connect the leg to +5v.
4. Lift leg 6 on video encoder and connect to Z80 pin 6.
Thanks!
David
|