Forums

Hi.

I've heard it's pretty simple to make a Master System 1 PAL console from 50 to 60Hz.

I have searched on Google but have not yet found a good guide or tutorial. Are there some here who have a guide?

Thanks

It is a very easy mod to do All you need is wire and a switch. Here is a very simple guide on youtube :)

http://www.youtube.com/watch?v=zItxC_T6uqE

It is a simple mod but requires a bit of skill with a soldering iron, as you have to lift Pin 57 from the Mobo and solder to it.

I have performed this mod plenty of times but it can be fiddly, and if you break the pin off you will be stuck in 50 Hz forever :-(

if you are not confident doing this mod drop me a PM and we'll see if we can get something sorted

You don't need to lift a pin you can cut the trace near it and then solder a wire to the pin.

Author	Message
mixx5000 Joined: 22 Mar 2008 Posts: 14 Location: Denmark	Pal 60Hz mod guide? Posted: Thu Feb 16, 2012 8:29 pm
mixx5000 Joined: 22 Mar 2008 Posts: 14 Location: Denmark	Hi. I've heard it's pretty simple to make a Master System 1 PAL console from 50 to 60Hz. I have searched on Google but have not yet found a good guide or tutorial. Are there some here who have a guide? Thanks

moomin_pappa Joined: 01 Apr 2008 Posts: 43 Location: Northern Ireland	Posted: Sat Feb 18, 2012 8:21 pm
	It is a very easy mod to do All you need is wire and a switch. Here is a very simple guide on youtube :) http://www.youtube.com/watch?v=zItxC_T6uqE

RenagadeMods Joined: 13 May 2012 Posts: 2	Posted: Sun May 13, 2012 5:43 pm
RenagadeMods Joined: 13 May 2012 Posts: 2	It is a simple mod but requires a bit of skill with a soldering iron, as you have to lift Pin 57 from the Mobo and solder to it. I have performed this mod plenty of times but it can be fiddly, and if you break the pin off you will be stuck in 50 Hz forever :-( if you are not confident doing this mod drop me a PM and we'll see if we can get something sorted

Maraakate Joined: 05 Jun 2010 Posts: 551 Location: Pennsylvania, USA	Posted: Sun May 13, 2012 8:20 pm
	You don't need to lift a pin you can cut the trace near it and then solder a wire to the pin.

Forums

View topic - Pal 60Hz mod guide?