|
DevelopmentSega Master System / Mark III / Game Gear |
Home - Forums - Games - Scans - Maps - Cheats - Credits |
This is a French RGB Model from 1992.
It uses the same board, same VDP and I/O chips and same XTAL clock oscillator as the NTSC Master System II. The only differences are that the Video Encoder has been removed and RF output has been replaced by a specific A/V output connector. Also, JP1 jumper (VDP controller 50/60Hz mode select) is set differently than NTSC model (this one comes with a later added 50/60Hz switch but original model had JP1 jumper set to "PAL" for 50hz video output).
Contrary to other (non-RGB) PAL Master System II boards, this board has a 315-5216 I/O controller. Note that, even when this RGB model is running at 50hz, it will run slightly faster than other PAL models which uses a 53.203424 MHz Oscillator (divided by 5 to produce VDP XTAL clock).
Photos by Eke