The port is a standard 15 pin D-sub male connector, accepting a female cable plug. Looking at the:
| | |
Cable plug | | Handle Controller socket |
Pin functions
Pin number | Default Value | Function |
1 | - | Gnd |
2 | N.C. | |
3 | 1 | TH |
4 | - | Right |
5 | - | Left |
6 | - | TL |
7 | N.C. | |
8 | - | TR |
9 | N.C. | |
10 | - | Down / Push |
11 | - | Up / Pull |
12 | 1 | (/serial_read) |
13 | - | (serial_out) |
14 | 1 | (serial_clock) |
15 | - | VCC |
Notes
- Serial read signals, in parentheses, are not implemented in the SMS Handle Controller.
- You can use this pinout in conjunction with the Controller Port pinout in order to build a replacement cable for your Handle Controller.